| Specifications | C10T | C10TM | C10TH |
|---|---|---|---|
| CAPACITY | |||
| Swing over bed (mm) | 660 | 760 | 860 |
| Swing over cross slide (mm) | 420 | 520 | 620 |
| Swing in gab (mm) | 850 | 950 | 1050 |
| Distance between centers (mm) | |||
| SPINDLE | |||
| Spindle bore (mm) | 103 | 132 | 132 |
| Spindle speed ranges (rpm) | 9-1320(15) | 7.5-1015(17) | 7.5-1015(17) |
| Motor Power (kw) | 11 | 11 | 15 |
| FEED | |||
| Number of feeds | 150 | 150 | 150 |
| Longitudinal feed range (mm/r) | 0.039-18 | 0.039-18 | 0.039-18 |
| Cross feed range (mm/r) | 0.02-9 | 0.02-9 | 0.02-9 |
| TAILSTOCK | |||
| Quill diameter (mm) | 105 | 105 | 105 |
| Quill taper (morse) | No.6 | No.6 | No.6 |
| Quill travel (mm) | 225 | 225 | 225 |
| Thread | |||
| Metric thread range (mm) | 0.5-180 | 0.5-180 | 0.5-180 |
| Inch thread range (TPI) | 60-1/6 | 60-1/6 | 60-1/6 |
| Module thread range (module) | 0.125-45 | 0.125-45 | 0.125-45 |
| Diametric pitch threads(DP) | 240-2/3 | 240-2/3 | 240-2/3 |
Standard Accessories
4Jaw chuck
3Jaw chuck
Dead center
Steady rest
Follow rest
Face plate
light system
cooling System
