| Specifications | CU800 | CU1000 | CU1250 |
|---|---|---|---|
| CAPACITY | |||
| Swing over bed (mm) | 890 | 1090 | 1320 |
| Swing over cross slide (mm) | 490 | 690 | 940 |
| Swing in gab (mm) | 1050 | 1250 | 1500 |
| Distance between centers (mm) | |||
| width of bed (mm) | 700 | 700 | 700 |
| SPINDLE | |||
| Spindle bore (mm) | 155 | 155 | 155 |
| Spindle speed ranges (rpm) | 6.3-1250(24) | 6.3-1250(24) | 5-1000(24) |
| Motor Power (kw) | 22 | 22 | 22 |
| FEED | |||
| Number of feeds | 160 | 160 | 160 |
| Longitudinal feed range (mm/r) | 0.032-38.9 | 0.032-38.9 | 0.032-38.9 |
| Cross feed range (mm/r) | 0.016-19.45 | 0.016-19.45 | 0.016-19.45 |
| TAILSTOCK | |||
| Quill diameter (mm) | 125 | 125 | 125 |
| Quill taper (morse) | NO.6 | NO.6 | NO.6 |
| Quill travel (mm) | 260 | 260 | 260 |
| Thread | |||
| Metric thread range (mm) | 0.5-480 | 0.5-480 | 0.5-480 |
| Inch thread range (TPI) | 60-1/16 | 60-1/16 | 60-1/16 |
| Module thread range (module) | 0.125-120 | 0.125-120 | 0.125-120 |
| Diametric pitch threads(DP) | 240-1/4 | 240-1/4 | 240-1/4 |
Standard Accessories
4Jaw chuck
3Jaw chuck
Dead center
Steady rest
Follow rest
Face plate
light system
cooling System
