| Specifications | CU500 | CU580 | C11MT |
|---|---|---|---|
| CAPACITY | |||
| Swing over bed (mm) | 500 | 580 | 600 |
| Swing over cross slide (mm) | 300 | 380 | 400 |
| Swing in gab (mm) | 670 | 780 | 800 |
| width of bed (mm) | 360 | 400 | 400 |
| Max. work length in between centers (mm) | 1000/1500/2000 | 1000/1500/2000/3000/4000/5000 | 1000/1500/2000/3000/4000/5000 |
| SPINDLE | |||
| Spindle bore (mm) | 62 | 72 | 80 |
| Spindle speed ranges (rpm) | 20-2000 (21) | 20-2000 (21) | 11.5-2000 (16) |
| Motor Power (kw) | 7.5 | 7.5 | 7.5 |
| FEED | |||
| Number of feeds | 120 | 120 | 160 |
| Longitudinal feed range (mm/r) | 0.04-12 | 0.04-12 | 0.02-12 |
| Cross feed range (mm/r) | 0.02-6 | 0.02-6 | 0.01-6 |
| TAILSTOCK | |||
| Quill diameter (mm) | 70 | 90 | 90 |
| Quill taper (morse) | NO.5 | NO.5 | NO.5 |
| Quill travel (mm) | 180 | 230 | 230 |
| Thread | |||
| Metric thread range (mm) | 0.5-120 | 0.5-120 | 0.25-120 |
| Inch thread range (TPI) | 60-0.25 | 60-0.25 | 120-0.25 |
| Module thread range (module) | 0.125-30 | 0.125-30 | 0.0625-30 |
| Diametric pitch threads(DP) | 240-1 | 240-1 | 480-1 |
Standard Accessories
4Jaw chuck
3Jaw chuck
Dead center
Steady rest
Follow rest
Face plate
light system
cooling System
